Are all vintage sizes different from modern sizes?
Size tags on vintage clothing, by today’s standards, are somewhat misleading. For example, a 1960s size 12 is roughly equivalent to a modern size 8 or 10. Moreover, fifty or 60 years ago women's waists were typically shorter, so a "medium sized" garment might not fit a modern medium sized woman.
How can I be sure your items will fit me?
Due to the fact that vintage and modern sizes differ so greatly, I have included actual garment measurements, as well as the modern size equivalent within every listing, to try to help you determine a proper fit.
There is also, in addition, a link to my sizing guide on each product page for your immediate reference. Please take the time to familiarize yourself with this guide before making a purchase.
I would highly recommend that my customers take some time to measure themselves (or perhaps a garment that they own already, that fits just right) to ensure a proper fit.
Here's how to go about that process:
Using A Garment You Own Already
Lay your own item flat and measure with a flexible measuring tape at each of the points referenced in the listing. If you like you can double the waist, bust/chest and hip measurements to give you the full circumference.
If your garment's measurements are smaller than or equal to the given measurements of our item within the listing detail, at each reference point, the garment should fit.
Using Your Own Body Measurements
You will need to use a flexible measuring tape for all measurements; make sure the measuring tape is wrapped snugly, but not too tightly – as you need the measurement to be accurate.
Wrap the measuring tape around the fullest part of your bust. Add 1 1/2" - 2" to this measurement for ease of movement. For coats, add 3" - 5" to this measurement; for strapless items subtract 3" - 4" from your normal bra size for best fit.
Wrap the measuring tape around the smallest part of your natural waist. Just for reference purposes, most vintage garments are supposed to be worn at or above the natural waist, not below it. Add 1" to this measurement for breathing room.
Wrap the measuring tape around the fullest part of your hips and bottom; making sure that the measuring tape is snug to your body, but not too tight. Add 1 1/2" - 2" to this measurement to account for walking and sitting.
Measure across the back of your shoulders from the mid-point of each shoulder bone. For coats, add 2" - 3" to this measurement. Women's vintage clothing can be narrow in the shoulders.
It is best to take a good deep breath to help expand your ribcage and then measure around the fullest part of the under bust. This will be directly underneath the breasts.
You will need to measure straight down the outside of your leg from the natural waist to the point at which you wish the trouser edge to fall.
You will need to measure straight down from the highest point of your shoulder to the point at which you wish the dress hemline to fall.
You will need to measure from your crotch area down the inside of your leg, to the point at which you wish the trouser hemline to fall.
You will need to measure from your crotch area up toward your belly button, to your natural waist. Most vintage garments are supposed to be worn at or above the natural waist, not below it.
Please see the charts below to familiarize yourself with modern sizes and their corresponding measurements.
(Actual body measurements)
How To Measure Your Foot For A Good Fit For These Shoes
Step 1: Sit on a chair and place your bare foot flat on a piece of plain white paper.
Step 2: Carefully trace the outline of your foot onto the paper.
Step 3: Do the same with your other foot.
Step 4: Compare the two tracings (a good method is to place one paper over the other and hold them up to a source of light). Complete Steps 5 and 6 using the larger/longer foot.
Step 5: Measure the tracing from toe edge to heel edge to get the inside shoe length.
Step 6: Measure the tracing from edge to edge at the widest part to get the inside shoe width
The Shoe length should be about half an inch or 1.25cm longer than foot length. e.g. a 10-inch foot needs a shoe at least 10.5 inches long
How To Measure Your Head For A Good Fit For This Vintage Hat
If you have an old hat that fits comfortably, measure the inside circumference of the head opening of the hat to obtain your accurate Vintage Hat Size:
Vintage Hats are not always marked with a size, so you really need to know your head measurement and the hat circumference of the hat for sale.
1.You will need to measure your head to the nearest 1/8 inches or 1/4 inches that should be close enough.
2.You will need a flexible tape measure.
3.Measure the circumference of the head just above the top of the ears.
4.Wrap tape gently around the head making certain the tape lies midway on your occipital bone (the little bump in the middle of the back of your head).
5.You don't want to pull the tape too tight or it will give you a measurement for a tightly fitted hat.
When you are done, you have your hat size for the normal vintage hat.
HAT SIZE 6 7/8 = 21 5/8inches = 54,9cm
HAT SIZE 7 = 22 inches = 55,8cm
HAT SIZE 7 1/8 = 22 3/8inches = 56,8cm
HAT SIZE 7 1/4 = 22 3/4inches = 57,7cm
HAT SIZE 7 3/8 = 23 1/8inches = 58,7cm
HAT SIZE 7 1/2 = 23 1/2inches = 59,6cm
HAT SIZE 7 5/8 = 23 7/8inches = 60,6cm
HAT SIZE 7 3/4 = 24 1/4inches =61,5cm
HAT SIZE 7 7/8 = 24 5/8inches = 62,5cm
HAT SIZE 8 = 25 inches = 63,5cm
The sizes taken for hat measurement are the internal Hat Circumference, the height of the hat and the brim size if any.
I feel passionate about every single item that has been collected and displayed within these pages. I feel that each item has value because of its story, its impact on fashion, or its significance to its original owner. I make sure that each piece is cared for, appreciated and passed on to someone who feels the same way.
Monday - Friday .................. 9.00 to 18.00
Saturday ......................... 9.00 to 17.00
Sunday ........................... 10.00 to 16.00
Vintage Fashion Guild
HIA Web Design